Cobalt Metal for industrial supply. Select a grade below, review its chemistry and request a quotation for your quantity, product form and destination.
Grade-specific supply · UK & Hong Kong trading contacts
Illustrative product view · Request current lot photographs with your quote.
A MATERIAL MATCHED TO YOUR PROCESS
The grade is the starting point.
Compare the compositions below, then send the grade you need with your order quantity. The quotation defines the supplied chemistry, sizing, packing and delivery terms.
Battery cathodes
Superalloys
Hard-facing and carbides
Catalysts
BETTER FUTURE METAL LIMITED · Cobalt MetalReference specification — not a lot test certificate
PRODUCT SPECIFICATION
Choose the chemistry.
1 GRADE PROFILE / Co
Cobalt · ≥99.9% reference
REFERENCE CHEMISTRY · NOT A LOT TEST
Chemical composition for Cobalt · ≥99.9% reference. Percent by mass unless a row specifies ppm or a different basis.
ELEMENT / PARAMETER
PUBLISHED VALUE / LIMIT
BASIS
Co (by difference)
≥99.9%
Mass %
Ni
≤500 ppm
Parts per million
Cu
≤20 ppm
Parts per million
Fe
≤100 ppm
Parts per million
S
≤20 ppm
Parts per million
C
≤40 ppm
Parts per million
Standards & designations: MMTA cobalt reference norm. Specify the required edition and product form in your enquiry. A listed designation does not certify the supplied lot.
MMTA calculates Co by subtracting Ni, Cu, Fe, S and C from 100%. This is a technical grade reference, not a claim of Sherritt origin or producer affiliation.
Quote this exact grade, or add it to a combined request. Different grades can be quoted as separate lines.
Product form and size distribution are agreed for the selected grade. Include dimensions, lump sizing, mesh or particle-size requirements in your request.
02 / ORDER CONFIGURATION
Quantity & packing
Specify your required net quantity and packing: drums, bags, bundles or other suitable format. Unit weights and marking are confirmed in the quotation.
03 / COMMERCIAL DETAIL
Delivery & terms
Send the destination, required delivery date and shipping terms. Availability, origin and lead time are confirmed for the proposed supply.
MTC / CERTIFICATE OF ANALYSIS
The document must match the material.
Request the proposed lot’s chemical analysis and traceability documents with your quotation. Where EN 10204 inspection documentation is required, state type 3.1 or 3.2 before order confirmation.
01Producer / issuing laboratory and certificate reference02Heat, batch or lot identification03Grade, order specification and standard edition04Measured chemistry, limits and test methods05Date, authorisation and agreed inspection scope
The selected grade table is a reference specification. Actual measured results must identify the proposed lot.
